E078KIT
Digital length comparator
( Cement-Mortar )
EN 12617-4 EN 1367-4 EN 12808-4 ASTM C151 ASTM C490 NF P15-433 NF P18-427 BS 1881:5 BS 6073 DIN 1164
Length comparator with digital gauge 12.7 mm travel by 0.001 mm divisions mod. S382-01, complete with battery and RS232 connection to PC.

( Cement-Mortar )
EN 196-7 ASTM C183 AASHTO T127
Used to sample cement in bulk storages or shipment.
Brass made, it consists of two concentric tubes with slots.
Inside tube volume is 3 litres approx.

● Dimensions: dia. 40x1500mm
● Weight: 5 Kg

Concrete is one of the most used materials in the construction industry. Several variables contribute to define the quality of the concrete utilized for a structure: workability, consistency, setting time and air content are only few examples.

The analytical sieve shaker AS 450 control is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtainable even after very short sieving times.

( Aggregates-Rocks )
EN 932-5 ISO 3310-1
Designed for sieving considerable quantities of any material. The sieve shaker can hold six screen trays and dust pan.
Supplied complete with dust pan, but without screen trays (to be ordered separately). It cannot be sold in CE markets without protection (see accessories).

Power supply: 230 V 50 Hz 1ph 750 W
Dimensions: 585x790x850 mm
Weight: 180 Kg approx.

The Porta-Screen, Testing Screen and Test Master Sieve Shakers are ideal for particle size determination on large samples of aggregates, sand, gravel, slag, ores, wood chips and other coarse materials.

The UTGD-0290 (2500 W) and UTGD-0310 (2200 W) Universal Coring Machines are powerful diamond drilling units serve for shock free wet drilling into concrete, natural stone and asphalt with coring diameter max. 200 mm for UTGD-0290 and coring diameter ranges 25-202 mm for UTGD-0310 respectively. Both models are optimal complements to handheld diamond drilling machines.

UTGE Series Water Baths are used in various material testing analyses. 15 , 24 and 48 lt. tank capacity models are available and can be ordered with or without cooler units.

Compact, ergonomic and modern design, keeping maximum performance, for material testing.

With the right combination of accessories can do the tensile test ISO 6892, ISO 1608, EN 10002-1and ASTM E23, ASTM D695 compression test, bending test ASTM E290, test according to NADCAP, test to rubbers and elastomers on ISO 37, ruber properties ASTM D413, ASTM D412.

There are two models of the Cement Flow Table according to ASTM and EN standard. Both are used for determining the consistency of mortar, lime and cement specimens. Also manual and motorized models are available.

The UTCM- 0280 Automatic Blaine Air Permeability Apparatus perform the test for determining the fineness of cements, limes and similar powders expressed in terms of their specific surface according to the above testing standards. The fineness of cement can be automatically measured as specific surface by observing the time taken for a fixed quantity of air to flow through a compacted cement bed of specified dimensions and porosity.